In honor of the proceedings today I am naming my TRW/Kreiger build I.S. for impeachment special.
Barrel handtigntened, out of the box to within 8 degrees.
A little painter's tape before the action wrench.
Almost too easy.
- - - Updated - - -
Barrel indexing went perfect to within .1 deg. Next is finish reaming.
I like to pull the reamer out an flush the residue every few seconds.
In between reamer cleanings I like to run a chamber mop in to remove any chips.
A little more reaming and we will be golden.
Ah yes, a beautiful thing.
Barreled action, ready for the stock.