Results 1 to 4 of 4

Thread: Underwood M1 carbine.

  1. #1

    Default Underwood M1 carbine.

    I have this one for a long time also. It seems like I am the kind that likes Carbines, US 1911's and Garands.
    This Underwood I have had apart and it is all as it should be for the Ser.# range. 2601xxx, 1-44. Also has a S stamped receiver.DSCN1080.jpgDSCN1081.jpgDSCN1082.jpgDSCN1083.jpgDSCN1085.jpg Thanks for looking.

  2. #2

    Default

    Two more pictures.DSCN1086.jpgDSCN1087.jpgDSCN1084.jpg
    Mist 1 pict.
    Last edited by smoky; 02-01-2019 at 11:25.

  3. #3

    Default

    You sure have a nice Underwood carbine. Looks to be complete and original as it was made. The S, is it on the bevel of the receiver? If so it would be a receiver made for Underwood by United Shoe Machinery Co. Four sub-contractors were used by Underwood in making close to a 25% of their receiver production.
    Last edited by Tuna; 02-02-2019 at 06:35.

  4. #4

    Default

    Tuna:
    Yes the S is in the bevel of the receiver. Thanks for the reply.
    I wish I could do better picts. I know they are not very good.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •