I am wanting to get a take off barrel put on my 03 action. The barrel headspaces at about 3 o'clock. If I back it out to index the sight, headspace is too long. While I feel confident in fixing this with a Mauser, I am not confident,with square thread and an extractor notch. If I must, I will send it to a place that builds hot rod 700's, wait 17 months, and get it back butchered because they are not familiar with the 03. I would rather send it to a no-name 'smith that can correct the issue w/o me paying for his annual advertising budget, and putting both his kids thru college.
Can anybody provide contact info for a 'smith that can do this?