What are you using for roundball in your 14 gauges? What are you using for a mold?
Thanks in advance!
Mark
What are you using for roundball in your 14 gauges? What are you using for a mold?
Thanks in advance!
Mark
"A man with a tractor and a chain saw has no excuses, nor does he need any"
Me. "Consistency is the hobgoblin of little minds" Emerson "Consistency is the darling of those that stack wood or cast bullets" Me.
Last 14 gauge I messed about with, I used balls cast of WWL in a Lyman mould that was nominally .678". Balls were shot bare, in a column consisting of a lubed .125" nitro wad on the powder, then the bare ball, then a half-thickness nitro wad. Those shot better than the more-usual load of a heavily-patched .662" ball (again, from a Lyman mould). That particular gun was an original, bores actually mic'd about .694" so a tad oversize.
Jim
Jeff Tanner in England can make you a round ball mould in any size you specify. He will ship it to you via airmail so you can get it here in the U.S. about a week after ordering it.
His moulds take Lyman mould handles.
I have ordered several round ball moulds from him and have always been pleased with them and his customer service:
http://www.jt-bullet-moulds.co.uk/
thanks.
"A man with a tractor and a chain saw has no excuses, nor does he need any"
Me. "Consistency is the hobgoblin of little minds" Emerson "Consistency is the darling of those that stack wood or cast bullets" Me.