.223 IMR4064 load for AR gas system
Before anyone warns of the difficulties involved with loading long extruded granules of IMR4064 into a .223, please understand I have lots of 4064, and shorter extruded powders like Varget are still quite unavailable. I fully expect the loading to be "a pain."
Loading a 55 gr Dogtown soft nose bullet using IMR 4064 for a RRA LAR-15 with 20-inch barrel with 1:8 twist rate. My query: with these rifle particulars in mind, is 24.5 or 25 grains of powder the more appropriate?
As is usual, my thanks for any opinions.
"Wars are, of course, as a rule to be avoided; but they are far better than certain kinds of peace." - T.R.