Is there such a thing? I bought a slide that was part of a grab bag of parts. It has the longer/shallower disconnector cutout on the bottom, and is marked "MODEL OF 1911. U.S. ARMY" on the slide. It does not have any inspector marks of any kind nor a serial number on the back end above/below the firing pin hole. It is covered in grease and what looks to be pieces of wax paper here and there. I didn't take off all the grease - just enough to have a look at the markings, rampant colt, etc. The bluing looks bright/brilliant where I did clean it off. Here are a few (marginal) pictures too. Would appreciate some opinions/thoughts. Thank you!
20160228_183104.jpg20160228_183113.jpg20160228_183125.jpg20160228_183135.jpg