Thought I would share these...

Using the plan that Parashooter provided, I went down to my workshop this afternoon and banged this out of .020 brass sheet. First, I resized Para's picture until the scale was correct. Then, I cut the picture out and transferred it to the plate, scribing the lines where needed. I used my Dremmel with a cutoff blade to make the cuts, and then made my bends using clamps and some parallel bars for a simple brake. Once I had everything bent into the proper shape and locations, I silver-soldered the joints. I cleaned all the edges with a fine sanding drum in the Dremmel. I tested it, and made some adjustments... and then silver-soldered the back brace which made it nice and rigid. The whole thing took me about 2 hours to make once I had the picture sized to scale.... and it works great!!!

Thanks very much Parashooter for the plan!