Page 1 of 3 123 LastLast
Results 1 to 10 of 30
  1. #1
    Join Date
    Feb 2016
    Location
    Pittsburgh, PA
    Posts
    1,685

    Default A live round jammed

    There I was, at the range, shooting my 1925 Springfield M1903. After three shots, I chambered a live round that went part way into the chamber and stuck. I pushed the bolt harder - bad move on my part. Now the round is jammed and would not move in either direction. Not wanting to pound on the bullet from the muzzle, I consulted the Brownells web page and found and ordered one of their Stuck Case Pullers. It was on backorder so it took several weeks to get, but it was worth the wait. The puller is a well built, well designed tool that worked perfectly. The instructions are clear and there is even a tutorial video on their web page.

    It had to be the round, right? But I examined the case and it looked fine, I even pulled the bullet, primer and powder and put it through my resizing die and found nothing wrong.

    I tried to lightly chamber a dummy round in the rifle and it got stuck but the bolt extractor was able to pull it out. I looked inside the chamber with a bore light and could hardly believe that a tiny piece of grit on the chamber wall was causing the problem. It was easily removed with a medium bore brush soaked in bore cleaner. The dummy round would then completely enter the chamber smoothly.

    Obviously, a live round that is stuck part way into a chamber of any firearm immediately becomes a very dangerous condition. The puller is the safest way to remove it.

    One lesson I learned from this experience is to always gently chamber every round and stop pushing the bolt forward if resistance is felt. The bolt extractor might be able to pull it back.

    The thing I wondered about - how often did something like this happen on the battlefield?
    Last edited by Merc; 06-28-2021 at 12:21.

  2. #2

    Default

    Probably not rare and probably they just hammered on the bolt to clear the jam. (It's possible that might have worked here but no need for you to try.) If that didn't work, then throw the rifle away and find some other way to stay alive.
    Last edited by togor; 09-22-2019 at 05:35.

  3. #3
    Join Date
    Feb 2016
    Location
    Pittsburgh, PA
    Posts
    1,685

    Default

    Quote Originally Posted by togor View Post
    Probably not rare and probably they just hammered on the bolt to clear the jam. (It's possible that might have worked here but no need for you to try.) If that didn't work, then throw the rifle away and find some other way to stay alive.
    You do what’s necessary but your life can actually depend on a clean rifle.

    Maybe a few Vietnam vets can tell us about their experiences with their M16s.

  4. #4

    Default

    How close to home was the round when it jammed? Guessing pretty far. Was the grit at the neck or below the shoulder?

  5. #5
    Join Date
    Feb 2016
    Location
    Pittsburgh, PA
    Posts
    1,685

    Default

    The collet on the puller looks like it needs about 1/8” of free space between the chamber opening and the case head to grip the head and that is about all that I had. The grit particle was below the shoulder.
    Last edited by Merc; 06-28-2021 at 07:57. Reason: Clarification

  6. #6

    Default

    Glad you and your rifle were unharmed. Always worthwhile to pass such stories along. Thank you for posting.

  7. #7
    Join Date
    Feb 2016
    Location
    Pittsburgh, PA
    Posts
    1,685

    Default

    Quote Originally Posted by togor View Post
    Glad you and your rifle were unharmed. Always worthwhile to pass such stories along. Thank you for posting.
    You’re welcome. My favorite saying is: You never forget a lesson learned the hard way.

  8. #8
    Join Date
    Sep 2009
    Location
    Alabama, Gulf Coast Region
    Posts
    9,895

    Default

    Another reason I don't care for the AR15 system with the bolt assist. One push, as expected, may cause a stuck case.

  9. #9
    Join Date
    Feb 2016
    Location
    Pittsburgh, PA
    Posts
    1,685

    Default

    Quote Originally Posted by Allen View Post
    Another reason I don't care for the AR15 system with the bolt assist. One push, as expected, may cause a stuck case.
    My grandson’s AR 10 had a round jam the last time he went shooting with me. Fortunately, he was able to retrieve it. It may have come out of the mag at a bad angle.
    Last edited by Merc; 06-28-2021 at 12:22.

  10. #10
    Join Date
    Sep 2009
    Location
    London, Ontario
    Posts
    3,251

    Default

    That a reload or factory? If it's a reload, it's probable that the case neck got pushed down during bullet seating or sizing. Look for a wee bulge on the shoulder. It's not usually fixable as it will probably not fit in the sizer die. However, as you got it out it's possibly the OAL is too long and the bullet was stuck in the rifling.
    That "Stuck Case Puller' is not that. It's a ruptured case puller. Meant to remove cases that has the head pulled off.
    The normal method of removing a live round, assuming you can get the bolt out, is a 1/4" brass rod(about $4 in Home Depot) into the barrel and a plastic mallet applied forcefully to said rod.
    Spelling and grammar count!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •