Fixed stock setup all take the same length tube? A1, A2, SP1? Screw different lengths?
Steve
Fixed stock setup all take the same length tube? A1, A2, SP1? Screw different lengths?
Steve
The Original Point and Click Interface was a Smith & Wesson
actually, it is called the receiver extension,
and yes, all fixed stocks are the same length,
you will need a longer screw, and spacer, if you go with an A2 length stock, vs the A1/SP1
Thanx
Steve
The Original Point and Click Interface was a Smith & Wesson
Sorry but, what's all this got to do with buffer tube lengths?
Steve
The Original Point and Click Interface was a Smith & Wesson
It doesn't. What it shows it there are people out there peddling parts etc. that don't have a clue as to what they are selling. I am going to delete my post and you have my sincerest apologies for ruining your life with a light hearted experience. I won't bother you again, so sorry, you can go back to your safe room now.
Just curious,how many members have posted on this thread in the past month? I would think that somebody with interest in M-16's would appreciate anecdotes and tales about them. But obviously I am dim and you are bright... Sooo it is all yours, good luck with it.
BTW how long have you been a LEO?
Last edited by RED; 09-19-2017 at 07:03.
hmmmmm
did you read my post,
a fixed stock Receiver Extensions (the tube the buffer fits in) are the same for rifles,
the stocks are different lengths,,,
hence the spacer and longer (or no spacer and shorter) screws,
there are a few excepts to this , pistols being one of them
Question. can a pistol length buffer spring an tube be used if building a 20 inch ar, or would the extra pressure generated ruin the tube an spring assembly?
AIM TRUE, YOU MIGHT HIT THE TARGET:
[QUOTE=mike24d20;514096]Question. can a pistol length buffer spring an tube be used if building a 20 inch ar, or would the extra pressure generated ruin the tube an spring assembly?[/
What length gas tube. You will probably have a timing issue with that set up. A different weight buffer will probably be required. That combination I have not played with.
Thank you, was thinking of building a evil ar. Guess I will just get a dpms or del tron . Again thanks for the good info.
AIM TRUE, YOU MIGHT HIT THE TARGET: