Results 1 to 8 of 8
  1. Default Case Vertigris a reloading stopper?

    I soaked some 30-06 HXP brass in a cleaning solution of one cup of water, 1/4 cup of vinegar, table spoon of ajax dish soap and table spoon of ammonia water. The cases came out clean but coated with a bluish/green vertigris on the inside of the cartridge case. Are they still reloadable? Thanks in advance.

  2. #2
    Join Date
    Aug 2009
    Location
    Eastern Missouri
    Posts
    11,835

    Default

    Cases are now suspect with the use of ammonia. Bad JU JU for ammonia on brass cases. JMHO.

  3. Default

    Isn't ajax some sort of bleach? An doesn't mixing ammonia and bleach create some kind of poisonous gas?
    Fred Pillot
    Captain
    San Jose Zouaves
    1876

  4. Default

    Badness comes when you mix chlorine and ammonia cleaners, chemical reaction releases chlorine gas which is poisonous. I had a bunch of that HXP ammo from the CMP and a lot of the brass was corroded, I sent any piece with corrosion or staining to the recycler. There were a very few rounds that I didn't shoot because of the level of corrosion. If it were me, I'd discard that brass.

  5. #5
    Join Date
    Aug 2009
    Location
    Eastern Missouri
    Posts
    11,835

    Default

    If the brass is very nasty looking try a mixture of water, vineger and salt. Rinse real good, dry and tumble.

  6. #6

    Default

    Vinegar is a good solvent/cleaner on brass. Chlorine (bleach) and ammonia not. Joy dish detergent for washing dirty brass to a copper look.

  7. #7
    Join Date
    Sep 2009
    Location
    Bay area, Calif
    Posts
    14,985

    Default

    Ammonia is really bad for bores. Cases are easily replaced, bores are not.
    I often get cases slightly green inside - a brush gets rid of it.

  8. #8
    Join Date
    Sep 2009
    Location
    London, Ontario
    Posts
    3,251

    Default

    Vertigris is the copper coming out of the alloy. Using the ammonia water(whatever that is) caused it. Rinse 'em well in hot water and they should be ok. Ammonia eats brass, but it doesn't work that fast.
    You can leave the dish soap out too. Isn't needed and it leaves a thin film behind.
    Spelling and grammar count!

Similar Threads

  1. Reloading dies
    By BudT in forum The Reloading Bench
    Replies: 17
    Last Post: 11-19-2014, 06:29
  2. Reloading problem with .32 ACP
    By sid in forum The Reloading Bench
    Replies: 8
    Last Post: 10-31-2014, 02:52
  3. Reloading for Glocks
    By Allen in forum The Reloading Bench
    Replies: 6
    Last Post: 06-08-2014, 08:00
  4. New to reloading 45 automatic
    By Allen Humphrey in forum The Reloading Bench
    Replies: 12
    Last Post: 04-14-2014, 09:49
  5. Reloading for the AR 15
    By JohnMOhio in forum The Reloading Bench
    Replies: 10
    Last Post: 01-22-2014, 03:14

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •