Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Join Date
    Aug 2009
    Location
    Eastern Missouri
    Posts
    11,835

    Default Need a load for 1/8 bull barrel

    One of my AR's has a 1/8 twist 24" stainless bull barrel. I've been fooling with it for several years but I can't seem to find a load that's accurate. I've tried 55gr, 62gr and 69 gr bullets both Sierra and Nosler. Not that good. Does anybody have a load that might work?

  2. #2

    Default

    You might try 21.5 gr. IMR 4198 with 55 gr. bullet and 21.0 gr. with a 62 gr. bullet. The IMR 4198 has always been an accurate powder with the .223 and 5.56. Just have to find the sweet combo for your rifle. Velocity will not be the highest but it will be accurate.

  3. #3
    Join Date
    Sep 2009
    Location
    London, Ontario
    Posts
    3,251

    Default

    Try a heavier bullet. Sierra makes 77, 80 and 90 grain Matchkings. Hornady makes 75 and 80 grain A-Max and 75 grain HPBT's. I'd be thinking IMR4064.
    Spelling and grammar count!

  4. #4
    Join Date
    Aug 2009
    Location
    Eastern Missouri
    Posts
    11,835

    Default

    I'll try dropping the powder charge a bit and see if that helps. I have to order some more bullets znyway.

  5. Default

    Quote Originally Posted by joem View Post
    One of my AR's has a 1/8 twist 24" stainless bull barrel. I've been fooling with it for several years but I can't seem to find a load that's accurate. I've tried 55gr, 62gr and 69 gr bullets both Sierra and Nosler. Not that good. Does anybody have a load that might work?
    Is it a 223 or a 5.56? If it's a 5.56 it probably has a longer throat. You might try seating the bullet farther out.

  6. #6
    Join Date
    Aug 2009
    Location
    Eastern Missouri
    Posts
    11,835

    Default

    It's a 5.56 but the bullets can't be set any further out or they can't feed from the mag. I'm within .010 of the mag face. Droping the load seems my best bet or order some much heavier bullets.

  7. #7

    Default

    What powders have you tried. Varget, RL15, H4895, and TAC are the top rated powders by HP shooters.

  8. Default

    I like 23.5gr of TAC with a Sierra 77gr Matchking. Same with the 80 gr Matchking but those won't fit in your magazines and need to be single loaded. TAC is a spherical powder and meters nice, temperature tolerant and burns pretty clean. A buddy of mine bought a couple 8 lb jugs of Hornady LeverRevolution powder and swears by it. He found some for $125/xxxx a real good deal. It's a medium burning powder in the Varget/TAC/4895 range. I shoot a Rock River NM with a White Oak Armament 1/8" barrel. You might look for some Nosler 77s, too, I've seen good deals on them.

  9. #9
    Join Date
    Aug 2009
    Location
    Eastern Missouri
    Posts
    11,835

    Default

    I've tried TAC, Varget and 4895. Right now I have Accurate 2230 which works super well in my Colt match Target 1/7 twist. I think that's what I'll try for now.

  10. #10
    Join Date
    Aug 2009
    Location
    Eastern Missouri
    Posts
    11,835

    Default

    DANG! Went to load some test bullets for Sunday at the range and I have no more 69 gr Nosler's. I don't remember using all of them. I must have CRS I guess.

Similar Threads

  1. Load Evolution
    By Art in forum The Reloading Bench
    Replies: 6
    Last Post: 12-19-2014, 02:24
  2. My pet load I think
    By p246 in forum Trapdoor Rifles
    Replies: 17
    Last Post: 09-09-2013, 12:41
  3. H4831 M1 load?
    By gmg1183 in forum The Reloading Bench
    Replies: 13
    Last Post: 03-25-2013, 12:38
  4. Need load for '06
    By snakehunter in forum The Reloading Bench
    Replies: 7
    Last Post: 02-16-2013, 01:08

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •