Results 1 to 6 of 6
  1. #1
    Aligater Guest

    Default Holster Damage on Blued Pistol ?

    I have a Blackhawk .45 convertible. My Christmas present from my daughter last year was a beautiful new leather holster. I put the Blackhawk in the holster and forgot about it. Recently, I took it out and noticed that the blue had slightly changed color where the cylinder pressed against the side. Question: Can a holster adversely affect the finish of a blued gun? If so, how may it be prevented? Thanks,

    Bruce Payne (Aligater)

  2. #2

    Default

    Yes it sure can. There are chemicals that were used in making the leather that can affect the bluing on your firearm. Some linings in holsters can also attract and hold moisture which can also affect the bluing. I would just make sure you take the firearm out of the holster periodically, wipe it down with oil taking off any excess and put it back into the holster. Another is to use one of the dry spray on coatings. I'm sure others will have other ways to protect it and will chime in here.

  3. #3
    Join Date
    Sep 2009
    Location
    Yuma , Arizona
    Posts
    1,492

    Default

    Best way......never store it in a leather holster.
    Tanning chemicals are acids , metals and acids don't get along well.
    Chris

  4. #4
    Join Date
    Aug 2009
    Location
    Durand. MI.
    Posts
    6,778

    Default

    Tanic acid, the same that makes that green wax when leather & brass are used to-gether. I understand Mex. leather does not use it for tanning.

  5. #5

    Default

    That green wax is verdigris, and is poisonous. It is formed when anything containing acetic acid and copper are in close proximity. Tannic acid as used in vegetable tanned leather will also cause verdigris to form.

    As mentioned above, best not to store handguns in leather holsters. In humid climates leather holds moisture which is not good for handguns.

  6. #6
    Join Date
    Dec 2009
    Location
    Houston, Texas
    Posts
    9,256

    Default

    it isn't just leather, though leather can be the worst culprit. Long term storage in anything porous like the original cardboard box can cause some discoloration to the places where the metal touches the container if left in long enough, that can take many years though. The velour lining on the presentation case my Model 27 came in caused some slight discoloration on one spot on the cylinder, of course it had been in the box for over 20 years without being removed.

Similar Threads

  1. Replies: 2
    Last Post: 12-24-2014, 08:05
  2. Cause of brass damage?
    By jebbh in forum M1 Garand/M14/M1A
    Replies: 15
    Last Post: 09-12-2014, 09:11
  3. Blued slide release on US&S
    By jonnyo55 in forum 1911/1911A/Service Pistols
    Replies: 6
    Last Post: 04-30-2013, 05:36
  4. RC with blued bore
    By Dad in forum Mauser Rifles
    Replies: 2
    Last Post: 03-16-2011, 10:12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •