So I know that ishapore manufactured 2a's that shoot .308, but has anyone converted there .303's to 308's? I say this because I want a .308 enfield, but I want as many British parts as possible. Is this possible and has anyone done this?
So I know that ishapore manufactured 2a's that shoot .308, but has anyone converted there .303's to 308's? I say this because I want a .308 enfield, but I want as many British parts as possible. Is this possible and has anyone done this?
"I only get paid if I survive... And I like getting paid."
The Brits converted fairly large numbers of No4 rifles to 7.62mm NATO as emergency war reserve. 7.62mm No 4T sniper of one flavor or another served as front lined British sniper rifles until the mid - late 1980s. These 7.62mm rifles of any variety are rare birds over here. The conversion requires among other things, a new barrel, front sight, trigger guard, bolt head, extractor and magazine (I know I left stuff out but others will correct me.) I also understand that these rifles can have problems with ejection if you don't have the correct magazine. This conversion is not a job for the untrained even if you can get the parts.
Last edited by Art; 06-08-2014 at 05:42.
Ishapore (nor anyone else as far as I am aware) made Enfields in "Win 308".
A number of Countries / factories and private gunsmiths have manufactured or modified Enfields to 7.62 NATO - In Britain alone the MOD used L42 and L39 rifles in 7.62, The police used the Enforcer in 7.62. I Canada there was a big programme of 7.62 modifications, and of course Ishapore,
There are probably 100,000's of 7.62 Enfields.
Do not be fooled that 308 & 7.62 are the same. They are not. The cartridge looks pretty much the same but the case thicknesses are diferent and the rifle chambers are not the same. For example there is a 13 thou (0.013") difference in headspace, and you cannot just use 308 headpaces to gauge your 7.62.
Thanks for the advice, gents. I currently want a 7.62 enfield that is true British steel, but an l42 is out of my price range. How hard are parts to find? I will have a gunsmith assemble said parts to a no.4 when I find one. How hard is it to find 7.62 NATO no. 4 that was already converted?
Last edited by Johan412th; 06-09-2014 at 05:42.
"I only get paid if I survive... And I like getting paid."
Years ago I bought a one off 7.62 conversion by Cogswell & Harrison, imported and sold by Brian Dick. It used some modified standard parts like the mag, charger guide and extractor. I have owned it for 12 years and aside from launching bullets sidewise, as I reported here, it is fine. A proper recrown fixed that. Brian has an import license and he may be able to get one for you if the UK is so full of them. I did contact C&H to see if they had records on this rifle but no luck.
....if you can find .310"-.312" projectiles. I've had very little luck on that front. I have an order that's been pending at Midway so long that my credit card expired and I had to send them the updated info. Components are so hard to find for me, anyhow, that I hoard my reloads almost like my factory or milsurp.