Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2011
    Location
    Vancouver, WA
    Posts
    103

    Default I dislike asking questions like this but...

    I ran across a "carbine-ized" '98 yesterday. 20" barrel, and the stock fore end was well done, had the proper band spring. Stock was very nice but no cartouche present. Da**it, can't remember if there was a rear swivel or not. There was not a sling bar or handguard. The rear sight holes were plugged. What is eating at me are three things: the 20" bore is bright and sharp, it has a nice Redfield 102 receiver sight, and the price was $400.

    The reason I don't recall more details was that we were on a speed run thru this shop, which had alot of C&R stuff, most overpriced. I suppose I'm going to take a beating if I don't buy it....

  2. #2
    Join Date
    Apr 2010
    Location
    E.Central Illinois
    Posts
    5,609

    Default

    FWIW That's awfull high for a cut down.Personally I'd like it better at $250-300 as a shooter/hunting category rifle.

  3. #3
    Join Date
    Aug 2009
    Location
    Durand. MI.
    Posts
    6,778

    Default

    At gun shows here in MI they are asking 400 min., up to 600 for cut downs. Now I am not saying they get that and I do not know if sellers are ignorent of what they have or what. I have one "cut down", its in the 19,000 range but has a 99 stock and swivels.

  4. #4
    Join Date
    Aug 2009
    Location
    Upper Appalachia aka SE Ohio
    Posts
    1,476

    Default

    See how quickly the addiction takes hold Pentz! Hi, my name is Bob and I'm a Kragaholic! Kidding aside, it's a bit unusual for someone to put a band spring on a cutdown. Having said that, I have a Boyds carbine stock that is cut for one. So if you're thinking of reaching for your wallet, make sure what you're looking at is the real McKrag.
    "I have sworn upon the Altar of God, eternity hostility upon all forms of tyranny over the minds of man." - Thomas Jefferson

  5. #5
    Join Date
    Sep 2011
    Location
    Ypsilanti, MI
    Posts
    1,527

    Default

    I'm curious about the 20" barrel. Most cut downs are 22 inches... some, like mine are 24 inches. I would think a 20 inch barrel on a Krag would be too short to hold any kind of accuracy at longer distances.

    My sporter had the Redfield 102 sight and plugged rear sight holes, which was correctly identified as the sight screws filed off in the holes. A drill and easy out later, and I now have a proper 1902 sight installed.

  6. #6

    Default

    350 would be a fair price for a decent sporter around here. Ask yourself if the 50 bucks is important. Will the seller accept an ofer of 350.00.

    what will 4 bills get you in the way of a modern, new, deer rifle?
    "A man with a tractor and a chain saw has no excuses, nor does he need any"
    Me. "Consistency is the hobgoblin of little minds" Emerson "Consistency is the darling of those that stack wood or cast bullets" Me.

  7. #7
    Join Date
    Aug 2009
    Location
    Northern Virginia
    Posts
    315

    Default

    I have one with a 20" barrel and a slightly short LOP; Redfield 70 on the back, ivory bead on the front. I love it ... shot only light cast loads in it, but it's a ten-ring carbine.

    Resp'y,
    Bob S.
    Resp'y,
    Bob S.

    USN Distinguished Marksman No. O-067

  8. #8
    Join Date
    Sep 2011
    Location
    Ypsilanti, MI
    Posts
    1,527

    Default

    I guess the 20" isn't as uncommon as I would have imagined. I think that any length barrel that is the quality of the Krag barrels... and you could do a lot worse!

Similar Threads

  1. Mk 1 questions
    By 11mm in forum M1903/1903A3/A4 Springfield
    Replies: 16
    Last Post: 08-15-2014, 08:26
  2. Questions about a new 03
    By ncblksmth1 in forum M1903/1903A3/A4 Springfield
    Replies: 10
    Last Post: 10-02-2013, 09:12
  3. Stamping Questions!
    By jerrbear in forum Krag Rifle
    Replies: 5
    Last Post: 02-22-2013, 04:11
  4. Carbine questions
    By norton in forum Trapdoor Rifles
    Replies: 1
    Last Post: 02-19-2013, 09:02
  5. VZ 24 Questions
    By Fishnerd in forum Mauser Rifles
    Replies: 20
    Last Post: 04-24-2011, 12:07

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •