Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: VZ 24 Questions

  1. #1
    Join Date
    Sep 2009
    Location
    Baltimore, MD
    Posts
    512

    Default VZ 24 Questions

    I recently purchased a CZ Brno VZ24 at auction. Other than stock dings, it is borderline "museum condition", without import marks, all numbers match, canvas type sling and is serial number "512". For what I paid ($150) this seems a little too good to be true, and I am wondering if I am missing something here. Please let me know what I should be looking for.
    I know I will have to take some pictures for a better description with more details.

  2. #2
    Join Date
    Aug 2009
    Location
    Durand. MI.
    Posts
    6,778

    Default

    You have to describe all markings, crests, date on reciever top (if any), full serial number, and what is on side rail. Serial number should appear on reciever, barrel, bolt and stock. They should all be the same. Thousands of these rifles were re-built after the war by several countries, so "border line museum condition" is not un-common. It is originality that matters. 150 is about average for re-built VZ-24's. Canvas sling would not be original. Pictures would help, of the details I mentioned.

  3. #3
    Join Date
    Sep 2009
    Location
    Baltimore, MD
    Posts
    512

    Default

    I'll take pics tonight and upload them.
    My receiver, bolt, barrel, barrel bands, stock, etc. are all sn #512
    There are no numbers with the crest on the top of my receiver.
    This isn't my rifle, but has the same crest.
    Attached Images Attached Images

  4. Smile Cleaning rod and front sight protector?

    From what you wrote about your vz 24 it sounds all very good. The fact that all important parts have an identical serial number may indicate that the rifle was stored and maintained carefully. Check if you find some old stamps; sometimes parts from other rifles were used for repair an then re-stamped to have a rifle with matching serial number. Does the rifle still has its original cleaning rod and front sight protector? These items were very often removed and sold seperately. Keep in mind a cleaning rod for a vz 24 is NOT identical to the cleaning rod for the K98 and therefore a hard-to-find item. The gun sling might be original since the czech army used old stocks from the former Austrian-Hungarian Empire. The sling could be 'ersatz', made of canvas in lack of leather. This might be interesting for you as well: 'vz' is short for 'vzor' and means 'model'; The stamping on the receiver 'Československá zbrojovka Brno' means 'Czechoslovakian Arms Factory Brunn'. Would be nice to see some pics of your rifle.

  5. #5
    Join Date
    Aug 2009
    Location
    Durand. MI.
    Posts
    6,778

    Default

    VZ-24's only had 4 parts serialed. The fact that bands are numbered indicate a re-build, possibly by Germans in WW11. Really need more info and pic's to tell anything for sure. Rifle pictured above is an import!

  6. #6
    Join Date
    Sep 2009
    Location
    Baltimore, MD
    Posts
    512

    Default

    I was unable to get clear photos because of the glare from the flash. I'll have my wife take pics and post them soon.

    Markings:
    Serial # on receiver- 531 Z1
    Serial # on stock- 531 over LK5 (smaller size)
    Serial #'s on bolt, barrel band, front of trigger guard- 531

    Above the receiver's serial #, in small font, there is "E--picture of a lion--28"
    On the receiver, at the bolt carrier there is "VZ24"
    There are no other markings on the rifle.

    FYI- It was the only firearm at the estate auction, which had alot of WW2 souveniers- nazi propaganda, USA "surrender and we'll go easy on you" leaflets dropped from airplanes, etc. Interestingly enough, the attached bayonet was sold seperately and sold for more than the rifle itself.

  7. #7
    Join Date
    Sep 2009
    Location
    Baltimore, MD
    Posts
    512

    Default

    The picture I cut and pasted yesterday has the same crest as mine. Mine does not have the import marks seen at the bottom of the posted photo.
    BTW- I'm really beating myself up that I couldn't use a simple digital camera without the flash going off. This would be so much easier with photos.

  8. #8
    Join Date
    Sep 2009
    Location
    Baltimore, MD
    Posts
    512

    Default

    This is a photo I found on the internet that matches my receiver markings. The yellow box in the photo is where the "E, picture of a lion, 28" appears on my receiver.
    Attached Images Attached Images

  9. Default

    The 28 is the year of manufacture. It looks like a standard VZ-24.

    The VZ-24, like the FN Model 1924, and the Mauser Standard Modell, was a commercial military arm. In other words, it was made for sale, not to individuals, but to countries which needed to supply their armies in the "breather" between the two world wars. IMHO, VZ-24 was the best, followed by the Standard Modell and the FN, which was not in fact a standard Mauser 98, being a short action (the Yugo 24/47 is an FN 1924, and the Model 48 is a copy).

    The VZ-24, unlike the others, is a combination rifle, made with sling attachements for both infantry (bottom of stock) and cavalry (side of stock).

    Serial numbers on those rifles do not necessarily reflect the production year; a customer (country) specified what serial range it wanted in its contract.

    Jim

  10. #10
    Join Date
    Aug 2009
    Location
    Durand. MI.
    Posts
    6,778

    Default

    The serial number on this rifle, 531 Z1 is unique to the Czeck military, not export rifles. This rifle is the 531 one made in the Z series. The 1 after the Z indicates this is the frist production cycle. The cycle started with 0001 A1 and will end with 9999 Z1 and continue with the next cycle 0001 A2 to 9999 Z2 and on and on. The E (lion) 28 indicates the rifle was adopted by the Czech miltary in 1928 at Brno. The serial number with the Z1 after the serial (rather then a prefix) indicates manufacture at Brno also. As I stated above VZ's had only four serial numbers, barrel, rec., stock, bolt. The fact that yours has many others added and that the bolt lacks the Z1 cycle number indicates a rebuild at some time with a replaced but numbered bolt, by another country. I would suspect German WW11 use as they added serials to various parts. IF the rifle has no import marks (as the one you pictured above does) and with the circumstances of your getting it, it could very well be a GI bringback WW11 rifle. Value would be 2x above the average re-built import being sold at present time. I think you got a very good deal.
    PS; The stock mark of LK5 is a mystery to me and here too the serial should include the Z1.

Similar Threads

  1. Mk 1 questions
    By 11mm in forum M1903/1903A3/A4 Springfield
    Replies: 16
    Last Post: 08-15-2014, 08:26
  2. new 03-a3 sporterized questions
    By dlc_aec in forum M1903/1903A3/A4 Springfield
    Replies: 12
    Last Post: 06-11-2014, 07:35
  3. Questions about a new 03
    By ncblksmth1 in forum M1903/1903A3/A4 Springfield
    Replies: 10
    Last Post: 10-02-2013, 09:12
  4. Stamping Questions!
    By jerrbear in forum Krag Rifle
    Replies: 5
    Last Post: 02-22-2013, 04:11
  5. Carbine questions
    By norton in forum Trapdoor Rifles
    Replies: 1
    Last Post: 02-19-2013, 09:02

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •