Results 1 to 8 of 8

Thread: Update on 03a4

  1. #1
    Join Date
    Feb 2010
    Location
    NORTH CAROLINA
    Posts
    582

    Default Update on 03a4

    I put one together and actually got to shoot it at 600 yards at butner, here is the data book page

    first 6 shots were to get it into ten ring, interesting enough about the scope is that i the cross hairs completely cover and eliminate a 3" spotter at 600 yards, due to the width of cross hairs being one minute in width

    2.5 magnification is doable but shooter needs to keep to the basics, at 600 yards the bull (normal bull at 600) is quite clear, not big, but clear when setting yours up remember that the focus at 100 is going to change quite a bit when you look at 600

    am happy with results so far, and i was shooting 175 grain match king

    Last edited by pelago; 04-06-2011 at 02:32.

  2. Default

    There is no 15 or 18, and two 17's. ??

    jt

  3. #3
    Join Date
    Sep 2009
    Location
    Colo. Spgs., Colorado
    Posts
    2,568

    Default

    Quote Originally Posted by Marine A5 Sniper View Post
    There is no 15 or 18, and two 17's. ??

    jt
    My recordkeeping used to be a bit strange, too. I always figured it was more important to shoot 10's or X's than plot them in my record book. One can always go to the shots called and scored column to figure it out.
    Last edited by Bill D; 04-07-2011 at 07:33.
    "A generation which ignores history has no past and no future." - Jean Boden

    "In three words I can sum up everything I've learned about life: It goes on."
    -- Robert Frost

  4. #4
    Join Date
    Feb 2010
    Location
    NORTH CAROLINA
    Posts
    582

    Default

    i have never been good at data keeping in fact i am absolutely lousy, terrible rotten, horrible, lets see what other adjective i could use, did not want to make a "made up one" this one has the spilled water on it and all, even the cross outs where i changed elevation and wrote it down in windage...another thing is i wear reading glasses and do not wear them when i write in the book

    always wondered if one could do a data book with a small wireless recorder, do it all verbal and then transpose it into a visual book later on

    that be possible or doable?????

    i would shoot then see what it was look at the call and write the value down and many times forget to plot it on the darn sheet, and sometimes would say to myself was that 13 or 14 and put two 13's down, sorry for the confusion

    what i need to do is shoot, call, and then get ready for next shot, target up, look and shoot and write down the last hit and make the new call, and that is what the coach for the North State Shooting Club team coach is beating into my thick 67 year old head.. and that is not easy to do, thickheaded old grunts are hard to change
    Last edited by pelago; 04-07-2011 at 10:52.

  5. Default

    I think you did very well, my friend. I was just kidding you a bit. I don't think I could do as well. Good shooting with a nice looking firearm.

    jt

  6. #6
    Join Date
    Jul 2010
    Location
    The dry side of Washington St.
    Posts
    606

    Default

    Nice shooting Pelago. Looks like you walked the shots up the target with elevation changes before touching the windage. 2 more shots got you dead center. Well done.

  7. #7
    Join Date
    Feb 2010
    Location
    NORTH CAROLINA
    Posts
    582

    Default

    thanks, one of the problems i am having is the elevation and windage are (shall we say) on the crude side

    a word of caution to those building a repro, or building one of these with old sights

    i found out that the Lyman Alaskan has a movement up and down of 95 clicks, and a movement left to right of 95 clicks (at least mine does)

    windage was set at the range at 100 yards with the external adj, and the internal set at45 clicks, kept adj external to wind was zero'd, then locked the external redfield adj screw down with lock tite

    Now i Zero'd mine on 200 yard line with Hornady 168 Grain AQ Max, point of aim point of impact, when i first shot the 600 yard line i pure guessed at the elevation change needed, went with normal come up and hit paper first two sighter rounds, came up a total of 24 inches then started the windage deal did not have to get too exotic, and luckily there was no wind to speak of.. In my log book i have the last shot recorded and when i go to range i will adj up or down based on the former results of the rifle, when i shoot at Butner i will come down 11 minutes for first sighter shot

    think the rule for this rifle is to never take the scope back to mechanical zero for any reason, this is not like the ar or m1 or m1a, these older scopes probably will protest if the elevation or windage is screwed with on a daily base

    just my humble opinion
    but the more i shoot this thing the more i like it

  8. #8

    Default

    Good shooting!

    Semper fi!

Similar Threads

  1. Update 1/8 twist .223
    By joem in forum The Reloading Bench
    Replies: 6
    Last Post: 12-20-2014, 08:55
  2. Grandsons Garand update
    By gunner312 in forum For Sale/Wanted
    Replies: 4
    Last Post: 08-17-2014, 06:50
  3. Update--Triangle w/HEG
    By George in NH in forum 1911/1911A/Service Pistols
    Replies: 3
    Last Post: 07-25-2013, 10:38
  4. Clark S Campbell ....Update.
    By chuckindenver in forum M1903/1903A3/A4 Springfield
    Replies: 16
    Last Post: 05-01-2012, 09:31

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •