Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: mauser ser #

  1. #1
    joe Guest

    Default mauser ser #

    Hello i have a question everything i read says mausers have a four digit ser # mine has three and no letters in it how do i identify the year it is a 9 x 57 with a ramp front sight double set triggers. thank

  2. #2

    Default

    I think the information you are referring to is on military Mausers. In a couple of years Mauser also used a five digit serial number with a letter suffix since anticipated production would be unusually high in those years. On the military Lugers, P.38's, and K98k rifles the serial number started at 1 and went through 9999, where it started back over at 1a and went to 9999a, then b and so on through the alphabet. Some K98k production was so high that they went through the alphabet once and started over with an aa suffix.
    The military K98k rifles were dated on the front of the receiver with the code for the manufacturer. If yours is a sporter it may have been made from a military rifle with the markings removed, and a new serial number applied.

  3. #3
    joe Guest

    Default

    Thank you i had it bore casted and the gun dealer offered me 800.oo and said it was in poor shape it looks really nice to me so i think ill wait and try to get more for it.

  4. #4

    Default

    Could very well be what is known as a "Guild Gun" , a commercial sporting rifle put together in any number of small German gun shops; very likely a GI "bring back". If it's a guild rifle there'll be some markings on the underside of the barrel, you'll have to take the stock off.
    One such marking will be a crown/N ; the commercial nitro proof stamping used from 1893-1939. You might also find a "caliber" marking, something like 9mm/57 or 9/57.
    The stamping requirments for nitro rifles varied during the years 1893-1939. The combination of markings that you may have might give an indication of when the rifle was proofed. Often you'll find a combnation of older stamps along with a more modern one. The proof law required the use of the new (current) marks, but didn't prohibit the use of obsolete stamps which where often included through force of habit.

  5. #5

    Default

    Is the receiver marked Mauser? Does it have a folding rear sight? If so this could be a commercial made between the wars model. Pictures of it would help to ID it.

  6. #6
    Join Date
    Aug 2009
    Location
    mid Missouri
    Posts
    10,141

    Default

    the 9X57 is about the same as our .358Win. in velocity, trajectory & power. Does the stock have a small cheek rest? Rear peep sight, folding leaf rear? Square bridge or round? In other words, me and Tuna would like pix before we offer any other guesses. Does it have claw mounts for a scope?What are the markings on the receiver? byq or Mauser, Steyr etc?

    da gimp

  7. #7
    Join Date
    Aug 2009
    Location
    Durand. MI.
    Posts
    6,778

    Default

    Quote Originally Posted by kcw View Post
    Could very well be what is known as a "Guild Gun" , a commercial sporting rifle put together in any number of small German gun shops; very likely a GI "bring back". If it's a guild rifle there'll be some markings on the underside of the barrel, you'll have to take the stock off.
    One such marking will be a crown/N ; the commercial nitro proof stamping used from 1893-1939. You might also find a "caliber" marking, something like 9mm/57 or 9/57.
    The stamping requirments for nitro rifles varied during the years 1893-1939. The combination of markings that you may have might give an indication of when the rifle was proofed. Often you'll find a combnation of older stamps along with a more modern one. The proof law required the use of the new (current) marks, but didn't prohibit the use of obsolete stamps which where often included through force of habit.


    I have a guild rifle built on a Kar.98a WW1 action. Probably a GI bring back. I would imagine the 1939 proof law was still used after the war, till Germany got around to changing it. Any proof law used until 1939 certainly would not be used in 1945. As to cal. marking mine is only stamped with a 9 m/m with a 62 under that. The guy I got the rifle from was shooting 9.3x62 and recoil was VERY heavy! I can find no reference to a 9.0x 62 cartridge, and do not think a 9,0x63 would chamber. Also stamped on the barrel is 11/25 Could this be a date? Was there a 9,0x62? It has a crown N and a crown B G U also.

  8. #8
    Join Date
    Aug 2009
    Location
    mid Missouri
    Posts
    10,141

    Default

    yes there is a 9mmX62mm, cases & dies are very expensive, I think it's one of the semi custom RCBS dies. Always figured it was like a .35Whelan loaded warm if not hot.

    9.3mmX63mm is similar to but not equal to a .375H&H, cases & dies are very expensive too, but I think Norma & S&B make it too, & I think that they might make the 9mX57 ammo, but both nearly died out with WWII or there abouts.

    Welcome to the world of shooting old German drillings & bolt rifles, they are pretty & neat guns that are very well made, but dern expensive to reload for.

    I'd still like to see some pix.

    da gimp

  9. #9

    Default

    The 9.3x62 was a very common rifle in Africa, and still is. Ballistics are much like the .35 Whelen, although they usually favor heavier bullets. The most common is about 285 grains. I just returned from Africa few days ago, and when discussing rifles, next to the .375, the 9.3x62 was probably the most common non-US rifle.

    Norma, Seller and Belliot and even Hornady now load for it.

    Cases can be made from .30-06

  10. #10
    Join Date
    Aug 2009
    Location
    mid Missouri
    Posts
    10,141

    Default

    brother used a 9mmX62 (borrowed from his PH) on safari back in late 60's, early 70's for heavier plains game, said he liked it, performed well.

    da gimp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •