Depending on the sights, 40x's without the B suffix run $1000- $1200. The B suffix 700 action run a little more. 40x 722 action USMC marked are even higher value due to production numbers
Type: Posts; User: n64atlas; Keyword(s):
Depending on the sights, 40x's without the B suffix run $1000- $1200. The B suffix 700 action run a little more. 40x 722 action USMC marked are even higher value due to production numbers
Vern: Be brave and take it out of the stock and see if it works correctly out of the stock. Then look in the stock for rub marks where the wood might have swollen from moisture.
As said, it is just...
You won't burr screw heads if you use the proper screwdrivers. You need hollow ground bits like the ones Brownell's and Midway sell. They make sets that are for firearm screws and fit the slots...
Have you taken the action out of the stock and checked the safety that way? Sometimes the wood of the stock will swell and stop it from working properly
Can the follower button be taken out when you pull it down to the small hole in the side of the mag? Once that is out, the follower and spring will come out the top. Would have to see the top of the...
I finally found a H&R Reising MC58 to round out my Reising collection. It just happened to fall into my lap, so to speak.
Wasn't a cheap date but they don't come up for sale very often. I've been...
Same way you do a 1911 Mag. I suppose
head space would need to be checked. It also might need fitted at the lock and hinge
+1 on the above.
In my case, I was good at spelling, then had a blood clot stroke. The stroke was brought on by a bad heart valve. It messed up my eye sight, my short term memory and my spelling.
I add letters,...
http://writingexplained.org/a-vs-an-difference
Herschel:
Have you ever thought of doing a book or at least a picture essay on what you have in your collection or have seen through the years on the M1922's?
Parts for the MAS 45 are few and far between. Keep an eye on the auction sites and hope one shows up. There was a guy on rimfire central that had a few
parts. Haven't seen him post in a while though.
Bolts don't really interchange. Headspace will be an issue. It will need to be checked to see if it is in the correct range. You can check Gun Parts corp. to see if they have the parts. they are...
http://www.bullberry.com/gunsmithing-and-small-parts.html
The military had Mossberg put serial numbers on the 44US and 144US rifles.
serial numbers were not required on 22lr rifles and shotguns. I think they were required on handguns and maybe centerfire rifles. Can't remember ever seeing a centerfire rifle or handgun without a...
Most of the presentation boxes did not have a S&W logo on the box lid
$60 a round? Really?
missed the striker part. As for the 1911 clone, 2.5 is too light. You risk full auto fire with hard ball loads at that weight.
What model Taurus? Revolver or semi-auto?
On the A, you should be able to remove it by depressing the trigger. The C,D, and E's need to have the trigger pushed forward as they have
the micro motion trigger. You don't have an after-market...
Some Blue Sky's had very heavy import stamps that actually ovaled the barrel. Some were fine. I sold severl when they were
first available and had no complaints has to how they shot. If it shoots...
Chris: I see in your add that you have Savage mags with an S on the bottom . These are aftermarket also....
You can tell they are aftermarket by the roll pin that holds the mag catch lever. The originals used a solid pin.