I now have Vortex scopes on all my rifles . I picked them all up on sales at a few hundred off on each one . Very clear optics , repeatable return , zero stops on all mine ,illuminated reticles with...
Type: Posts; User: emmagee1917; Keyword(s):
I now have Vortex scopes on all my rifles . I picked them all up on sales at a few hundred off on each one . Very clear optics , repeatable return , zero stops on all mine ,illuminated reticles with...
IJ , IIRC , was an owl's head .
Chris
Go here and fill out your info and print a ballistic chart .
http://www.federalpremium.com/Ballistics_Calculator/
Your BC on a 405 grain should be around .281 to .284 .
HTH , Chris
Down around here , you can get 55 gr GI for .35 delivered . Most people don't bother to reload it . Once fired brass is available at .10 per . You can go to the outdoor ranges and pick up all you...
40 pieces of brass worth about .10 per = $4.00 . How much is all this worry costing you ?
Chris
Only bad thing in this day and age is that you would've had to sell your rifle to pay the lawyer's fees to defend you from her suit against you for ruining her hairdo with that one stray shot .
Chaz...
9.0 grains of H110 behind a 220 gr Lapua HPBT ( SMK 220 type ) set at 2.25 COAL will cycle fine IN A PISTOL GAS system with a H2 buffer .
11.2 grains of RL-7 is needed for a longer burn in a...
Correct.
Chris
These guys have them for $14.10 . Is there one tiny locating pin or two ?
http://www.gunpartscorp.com/Manufacturers/SmithWesson-33495/Revolvers-42026/MilitaryPoliceKFrame-38388.htm?results=All
Chris
Anything under the star would raise the whole star up . I'd guess crud in that one cylinder hole is not allowing that cartridge to seat all the way . Could be on the rim shelf or down deep . Clean...
You've led a very sheltered life . I started in the automotive / truck business in 1971 . I was around for the great change from fractions to mm . It drove most people nuts because they wanted to...
Two reasons :
1) Most of the manufacturers use MM in their specs , so I was making it easier for him to look .
2) Because I'm a math and science whiz ( spelling ...not so much ) . The metric...
The is no " standard " for the terms Lo - Med - Hi . Each maker picks their own . I find about 22-25 mm from top of picatinny to bottom of tube comfortable . That's 37-40 MM to center of a 30mm tube...
E-mail sent.
Chris
I have 7 original H&R 20 rounders . I'm selling my M55 , so I will not need most of them . I had 12-15 , but sold a lot of them for $150 ea with $12 shipping . You are in luck , though . A company...
Chronograph the '70s load and weigh the bullet . The same weight bullet of the same profile type moving at the same speed will have the same trajectory , or at least close enough that you wouldn't be...
My measure has a disk folded into a tepee with two holes along the edge to let the powder trickle past . It is very consistent , but don't know how much the disk contributes .
Chris
Really ????? Pray tell , in which pistol was it introduced in ?0
Chris
I went with several extra calibers in several uppers. Went with .300 Blackout in a SBR and a carbine and a .458 Socom in a carbine to start . I have suppressors coming in both calibers . I also went...
No , that's an 1887 .
Chris
During this time period , the semi-automatic pistol ( with the notable exception of the Colt 1911s in .45 ) , were not looked on favorably by most cops due to the reliability problems . They went...
It sounds like it's hanging up somewhere . Shoot it and see where it's at in the cycle when it binds , then see what its supposed to be doing at that point . You can then look there for a burr ,...
20 inches +/- 1/2 inch . This variation is consistent through production .
Chris
I have never heard of that and I can't come up with any reason why they would .
Chris
In mid-1888 a tin-plated brass cased, boxer primed cartridge became the standard. The tin plating inside the case was intended to increase the usable case life by slowing the galvanic reaction...