Thanks Bonnie. I see that midway carries them. I'm really surprised that this wasn't ever an issue with the army. BTW my ar is a S&W.
Type: Posts; User: albert; Keyword(s):
Thanks Bonnie. I see that midway carries them. I'm really surprised that this wasn't ever an issue with the army. BTW my ar is a S&W.
Anyone have this problem? My smith and Wesson group moves about 3" to right.
FN is so a military contractor.
I thought the longer 70 gr bullet had something to do with the feed ramp revision.
+1 on the thumbler model b. Mine is 30 years old and still using original motor. i must surely have polished over 150,000 rounds with it.
I've never taken my bolt apart. What does the tool do?
Check the m14 forum. Forged RockOla is the way to go.
I use an RCBS carbide die and only size the first half inch. They fit in my S&W and Winchester 92 just fine. I'm using 255s at usually 700-800 f/s so my brass not beaten up so badly. I'm on my...
The S&B is a little faster 1043 vs 1000 f/s for the same 73 grain bullet. About 9% more kinetic energy and for that little round I'd take any extra i can get.
It's a model 620 no hear shield or bayo lug. Probably right I didn't miss anything. Thanks.
At the local gun show was a Stevens 12 ga. It was about 90% condition at $375. On the side of the stock was a brass plate about 2"x4" held with four brass studs which said something like border...
Anyone have any tips for reducing case growth? My loads are standard, but I get some that stretch and need trimming others that don't. I trimmed them all and after shooting about 10% were over max...
It also dings a lot of brass that doesn't get jammed. The dings are from the oprod.
Probably best to just replace bolt springs? ...
Wideners has some of these arsenal 147gr "match" bullets. Whats the story on a pure copper jacket?
John, Next time you might want to paste the IMG link from photobucket and your picture will appear in post.
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=346635700
Two local "gunsmiths" worked on my SA 1911A1. Both times the new sight came off. I then sent the slide to Novak and had a dove tail front sight put on.
Dillon has the best customer service around and their reloading equipment is very high quality. I'd buy from them with confidence.
How does the "snap in place" feel when you flip the two legs of the sight? Is there any wobble or is it tight?
Thanks Mike
Thanks Johnny for looking it over. I'm guessing it is too. It s high probability but from what I'm learning here on the forum these things are never certainties. I guess the Germans had it right...
Johnny, Thanks for help. Here are other pictures.
http://i194.photobucket.com/albums/z96/lichtenau/sight5_zpsdc5bcd02.jpg
http://i194.photobucket.com/albums/z96/lichtenau/sight6_zps273b09c3.jpg
Thanks for advice guys.
http://i194.photobucket.com/albums/z96/lichtenau/sight4_zps17c3ebe8.jpg
http://i194.photobucket.com/albums/z96/lichtenau/sight3_zpse83e82a8.jpg...
All I have now during the shortage are 124 gr. plated bullets. The P38 is a little anemic when compared to other pistols. Anyone see a problem using them in moderate loads in a P38? I think the...
Outdoors Stores sell a beeswax prep for boots called Sno-Seal. It works great as a lube. I use about a fingertip full spread around on the palm of my hand and worked for a minute or so on a frisbee...