Finally had the chance to photograph my latest trapdoor, the 1866 I mentioned in the other thread. As always, tremendous thanks to Mr. Hosmer for his advice.
https://i.imgur.com/rlVyuDMh.jpg
https://i.imgur.com/Xjqt4qXh.jpg
https://i.imgur.com/MhFVnM4h.jpg
Unfortunately the cleaning rod is a problem - it doesn't screw in.
https://i.imgur.com/KlA2fSZh.jpg
The barrel liner can be seen clearly.
https://i.imgur.com/WmHuTFah.jpg
Still some case color on the hammer and sideplate, and the blackened finish on the door is still nice.
https://i.imgur.com/Jiaj0GOh.jpg
https://i.imgur.com/A9OrMpgh.jpg
https://i.imgur.com/dlK4Laih.jpg
https://i.imgur.com/HpLnmSJh.jpg
https://i.imgur.com/lONTVunh.jpg
Flat shows two cartouches, overlapping SWP and ESA.
https://i.imgur.com/440bIc1h.jpg
https://i.imgur.com/oLPIsGqh.jpg
The sight appears to have the numbering on the 'correct' side, facing the shooter.
https://i.imgur.com/YY44uPjh.jpg
Looks like it is marked "5," "3," and an ampersand "&" sign near the bottom. Had a bit of a hard time getting a good photo with my phone.
https://i.imgur.com/oGYn4xvh.jpg
https://i.imgur.com/9MYRatoh.jpg
Appears to be the "L" firing proof, and maybe a sub-inspector "O" mark. There's no trace of any fancy "N" left, to my eye.
https://i.imgur.com/nkScg3ih.jpg
https://i.imgur.com/g7oIkBYh.jpg
https://i.imgur.com/lFEMYOTh.jpg
https://i.imgur.com/kEqZkX9h.jpg
https://i.imgur.com/o6f0pZLh.jpg
https://i.imgur.com/J496Cmdh.jpg
https://i.imgur.com/GROQT0Wh.jpg
Decent bore, some pitting.
https://i.imgur.com/Qu0rTNGh.jpg
https://i.imgur.com/ixwl9X0h.jpg
https://i.imgur.com/wlvDhWkh.jpg