-
Krag Charger
Thought I would share these...
Using the plan that Parashooter provided, I went down to my workshop this afternoon and banged this out of .020 brass sheet. First, I resized Para's picture until the scale was correct. Then, I cut the picture out and transferred it to the plate, scribing the lines where needed. I used my Dremmel with a cutoff blade to make the cuts, and then made my bends using clamps and some parallel bars for a simple brake. Once I had everything bent into the proper shape and locations, I silver-soldered the joints. I cleaned all the edges with a fine sanding drum in the Dremmel. I tested it, and made some adjustments... and then silver-soldered the back brace which made it nice and rigid. The whole thing took me about 2 hours to make once I had the picture sized to scale.... and it works great!!!
Thanks very much Parashooter for the plan!
http://i1153.photobucket.com/albums/...ps5a816746.jpg
http://i1153.photobucket.com/albums/...ps1ec8fc2a.jpg
http://i1153.photobucket.com/albums/...psebd55296.jpg
http://i1153.photobucket.com/albums/...ps5c2405f4.jpg
http://i1153.photobucket.com/albums/...ps6ee55ce0.jpg
http://i1153.photobucket.com/albums/...psc5ea6aef.jpg
-
Oh, and before anyone asks... the black on the neck of those rounds tells me that they are my dummy practice rounds - no powder or primer!
I have a piece of .025 copper, so I think I'll make another as a backup unit!
-
I don't see any blood, must not have cut yourself. Now that you got the pattern down, keep at it, sell a bunch on ebay and maybe get a booth on vendor's row next year.
-
Just a little... and a little burnt also, but solvent cleans that off nicely so my secret's safe, LOL
-
-
Great job! I will take one once you've put them into production. :)
-
Hmmmm... This might be the ticket to earn a little extra "Camp Perry" cash. I might have to see what it would cost to make and ship them... if there were enough interest. What do you guys think?
-
Here's a hint to facilitate a series of quality products - use a mandrel.
http://i57.tinypic.com/16iwt3n.jpg
Note the shoulder on the "out" side - helps align cartridges regardless of OAL.
-
I'll try to make one of those today before I make my second charger. Thanks again Para!
-
Let's see- 2 hours, at $3/hr.= $6 apiece. Sound good?:eusa_whistle:
Regardless, I would be interested in one if you take it that far.