Still a gem or two to be found

Printable View

10-30-2020, 01:25
Darreld Walton

Still a gem or two to be found

Picked up another 'sportered' 1903 yesterday. S/N SA 931,XXX with 4-18 SA barrel.

Lightly buffed, Redfield side mount aperture, with a thin, gold bead after market post mounted in the original fsb.

Nicely finished old Fajen or Bishop stock, walnut, w/maple grip cap and angled forend tip, with 'white line' spacers and Pachmayer thin pad.

Nice looking bore, bright with the lands showing a bit of rounding of the edges, though I'm quite certain it'll be a good shooter. Bottom metal is about the same vintage, though it escaped the buffing wheel.

Receiver still has the 'bolt stop' installed in the magazine mortise, and a corresponding Bonney Forge bolt with two bolt stop notches in the bottom of the outboard recoil lug. Polished, but otherwise non-molested.

"Thin", smooth faced trigger, still a two stage with about a four pound pull on the second stage and good, clean, consistent break.

Should be a good 'shootin' rifle', though I believe I might just have enough parts to piece together a 1918 example, if I can find the right guy to weld up the holes for the Redfield and give a good Parker type finish to the metal. Otherwise, I'll leave it alone after freshening the stock. I've probably got a Grandkid or three who still has eyes good enough to shoot with an aperture. (don't want to d/t for a scope if I don't have to)

Just a quick note for those who still stockpile serial numbers and barrel dates.....
10-30-2020, 04:08
jmm03

Well geez Mr. Walton, you could have at least posted 1 photo... Jim
10-30-2020, 07:01
bruce

Wonderful find! Your grandson will have a real treasure to enjoy! Sincerely. bruce.
10-31-2020, 10:28
Sunray

"...Fajen or Bishop stock..." It was a sad day when both those guys closed. Had a Bishop stock on a bubba'd No. 1 Lee-Enfield years ago. I'd hate to think what it'd be worth now.
An aperture is better than the original sights. As long as you can see the front blade through it you're good.
11-01-2020, 10:45
Darreld Walton

Quote:

Originally Posted by Sunray

"...Fajen or Bishop stock..." It was a sad day when both those guys closed. Had a Bishop stock on a bubba'd No. 1 Lee-Enfield years ago. I'd hate to think what it'd be worth now.
An aperture is better than the original sights. As long as you can see the front blade through it you're good.

I like to pick up those stocks whenever I can, unless Bubba did damage that can't be recovered from. Most times, I encounter Mausers and 03's that have had those stock fitted, but rarely shaped to their potential, usually with a lot of wood that can be taken down to make some fairly svelte shooting sticks! In the ol' 'stock pile', I've still got a good half dozen waiting for the right metal to be melded with them.
11-01-2020, 06:10
JOHN COOK

I have.a Fajen stock on Mauser action in 25:06, Gunsmith measured me for fit. It was a wildcat. Made two years before Remington came out commercialLy with the round.. It will reach out and touch someone....

John in SC
11-05-2020, 10:43
Calfed

I've got a thing for 1903's and A3's. Over the years I've picked up a number of them...some which are restorable and some which are not.

I especially like the old school "targetized" 1903's.