PDA

View Full Version : 1847Walker by Uberti



kj47
12-30-2023, 07:41
Picked one up last summer from Midway. Fit & finish is excellant. Used 35 gr by volume triple 7 3f. Ran a few cylinders w/round balls. Reasonably accurate, would the pointed bullets be more accurate? Shoots to the left 2in & 3in high @ 7 yds from a rest.

Major Tom
12-31-2023, 04:39
Uberti makes the best clones of BP handguns as well as other clones like the 1873 Winchester.

Johnny P
01-10-2024, 07:52
Never had any luck with the conical bullets in blackpowder revolvers. Used .457 round balls, and they shaved a ring of lead when you seated them in the cylinder. Very accurate at 25 yards in Ruger Old Army.

dogtag
01-20-2024, 04:22
The blue on these revolvers is incredibly thin and will vanish
in an instant if it comes into contact with a commercial
kitchen type cleaner.
I found out the hard way on about an inch toward the muzzle.

Major Tom
02-07-2024, 09:54
My 2 Uberti revolvers still have original bluing after several years of shooting and cleaning. I only use products made for BP guns cleaning.

Phloating Phlasher
02-07-2024, 11:00
My 1858 is still all original finish, its like new.
I only use Ivory soap & hot water to clean followed by a warm water rinse, blow dry with a hair dryer & oil immediately.

54367

Major Tom
02-07-2024, 03:06
I like the 1858 Remington over my 1860 Colt because I don't have to mess with that dern barrel lock.