Jerry can Mil. issue spout gasket. [Archive]

maverick1

11-13-2017, 03:33

Hello, has anyone found aftermarket gasket for 5g issue jerry cans. Last look led me to a dead end.I'm looking for a donkey dick gasket for the can.

gwp

11-13-2017, 04:03

Amazon has round gaskets for the 5 gallon can as well as the oblong gaskets for the NATO 20 liter can.

https://www.amazon.com/GASKETS-Gallon-Rubber-MILITARY-USMC-80/dp/B01ENU2CGM

https://www.amazon.com/Jerry-Can-Gaskets-Pack-Replacement/dp/B01EYXVU70/ref=pd_sbs_328_6?_encoding=UTF8&psc=1&refRID=FREJ1FZXTX0EAJTHGTQ7

1972Doug

11-16-2017, 08:34

Got mine off ebay

ClintBarret

11-27-2017, 04:25

Amazon has round gaskets for the 5 gallon can as well as the oblong gaskets for the NATO 20 liter can.

https://www.amazon.com/GASKETS-Gallon-Rubber-MILITARY-USMC-80/dp/B01ENU2CGM

https://www.amazon.com/Jerry-Can-Gaskets-Pack-Replacement/dp/B01EYXVU70/ref=pd_sbs_328_6?_encoding=UTF8&psc=1&refRID=FREJ1FZXTX0EAJTHGTQ7

Hmm, I'll be taking note of these for future reference.

dave

11-27-2017, 09:17

Buy gasket material and make them!

Mike

11-27-2017, 01:28

Hi, this guy sells a lot of stuff for cans.....http://www.jagmte.com/index.php?route=product/category&path=59 If your looking for the oblong gaskets , try here......https://deutscheoptik.com/jerry-can-cap-gaskets-set-of-five.html Regards, Mike

RED

12-10-2017, 10:27

Hello, has anyone found aftermarket gasket for 5g issue jerry cans. Last look led me to a dead end.I'm looking for a donkey dick gasket for the can.

While we are on the subject, anybody know how to cement the gaskets in so you don't use them? I'm thinking of using a hot glue gun.

leftyo

12-12-2017, 11:22

While we are on the subject, anybody know how to cement the gaskets in so you don't use them? I'm thinking of using a hot glue gun.

if you mean so you dont lose them. hit the auto parts store and get a small tube of weatherstrip adhesive. a small amount will hold a gasket in place nicely.