M1903 with Numrich .22 Conversion

[Mike D]

Finally got around to taking a few shots of the LN '03 I put together to use with my Numrich .22 conversion kit.

Didn't take much time to find a bare LN receiver that was already d & t'd for the Lyman. I wanted a Lyman 48 with a 125 slide, but couldn't beat the price when I found the one that's on there.

The barrel is dated 3-26 and is a sewer pipe! It's probably not doing much for the finish of the Numrich barrel, but it fit the bill.

The Keystone C-stock was about $45 off of fleabay a few years ago. I guess nobody wanted it because of the chunk out of the pistol grip and another small piece gone near the top of the buttplate. It's sound, and I don't mind the "battle scars".

Haven't got around to a serious accuracy test. Right now it's just dialed in for "minute of squirrel".

Bolt is a little stiff when loading a round in the chamber, but it works. When I first put it together it would not fire. Pin wasn't hitting the case hard enough. Ended up replacing the main spring with one from a regular '03 bolt. If I remember correctly, the spring that came with the bolt was longer than a regular one?

http://i926.photobucket.com/albums/ad102/m1carbiner/M1903%20with%20Numrich/22M1903017_zps3387ad65.jpg
http://i926.photobucket.com/albums/ad102/m1carbiner/M1903%20with%20Numrich/22M1903019_zpsc762c80f.jpg
http://i926.photobucket.com/albums/ad102/m1carbiner/M1903%20with%20Numrich/22M1903020_zps47091350.jpg
http://i926.photobucket.com/albums/ad102/m1carbiner/M1903%20with%20Numrich/22M1903022_zpscb40edb8.jpg

[Fred]

Neat looking rifle Mike!

[RCS]

I have a low number SA with a shoot-out barrel that came from the CMP a few years ago. I met a man from NC who installs quality 22 rim fire liners in shoot-out and drill rifle barrels. I
got a barrel with the liner and short rear extension for my low number receiver, also used an old Lyman scope 4X, only tested at pistol range distance with standard rim fire. I used a M2 bolt with the headspace adjustment. I found a trigger guard for the magazine and am working on that project224552245622457

[Jim in Salt Lake]

Now that's what I call recycling! Those are two neat rifles.